A Veteran Owned Business
Welcome to VIPERTAC!
APS Phantom Extremis MK1 SDU Gel Blaster Rifle - Black
The Phantom Extremis MK1 features a fully ambidextrous fire control, ambidextrous magazine release, 10" Keymod Handguard, full length accessory rail for mounting optics, front and rear polymer sights, 5 position adjustable RS1 stock, Silveredge V2 Gearbox and is hitting around 280 + FPS out of the box on 7.4v battery.
The Phantom Extremis MK1 comes in multiple color ways - Black, Tan, Multicam, Black Multicam, Tan, ATACSFG & ATACS AU.
DISCLAIMERDo not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery.
eSilver Edge GearboxQuick Change Spring SystemThe Quick Change Spring Guide has 4 locking lugs instead of 2.Polished and Buffed housing surface.8mm Bearing Bushings, Bearing Piston Head and Bearing Spring Guide.Mosfet Installed
** Battery, Charger & Gels not included
ESILVEREDGE GEARBOX SDU INSTRUCTIONS/SPEC
SDU2.0 is a programmable ECU chips that is being used in eSilver Edge Gear Box
Simply pressing down the button underneath of the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needs, it is easy to program anytime and anywhere by the user.
First, connect your AEG with a fully charged battery (7.4V) Battery. The usuaal battery that you used when your play.
Second, find the switch button. The button is located underneath of the gear box reachable from the magwell of the lower receiver.
How to change the mode?
Step 1) Press and hold the button. You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.
Choice of Firing Mode:
Mode 1 (Default)
**Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **
Use of Advanced S.D.U.™ chips
The S.D.U.™ chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.
Micro Switch Trigger
eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.™, providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand press. With the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.
** Battery, Gels & Charger not included